The best replacement for a uPVC door handle depends on whether the handle uses a spring cassette or an internal torsion spring. For a cassette-style repair, the River 8mm set is best for buyers matching Hoppe-style dimensions, while the metal cassette pair is better for shoppers seeking a replacement box. The other options are loose springs for repairing handles that can be opened. Measure the existing part and check the handle’s construction before ordering; these parts are not automatically interchangeable.
| Product | Best For | Part Type |
|---|---|---|
| River 4-piece set | Matching 8mm cassette replacements | Spring cassette |
| Metal cassette pair | Replacing a cassette, excluding 70PZ/70mm | Spring cassette |
| FMTB-MSA 5-pack | Right- or left-hand internal spring repairs | Coil spring |
| FMTB-MSWJ 5-piece set | Matching a torsion spring by design | Round torsion spring |
| Marsrut 8-piece set | Choosing from multiple spring sizes | Internal replacement springs |
River 8mm uPVC Handle Spring Cassettes
This four-piece set is a spring cassette replacement intended for Hoppe uPVC door handles and described as compatible with most spring boxes. Each cassette measures 22mm wide, 62mm high, and 5mm thick, with an 8mm spindle hole. The listing describes it as a direct replacement that does not require adjustment.
Best for: Buyers whose existing cassette matches these measurements and uses an 8mm spindle hole. It is the most clearly dimensioned option here for a cassette-based uPVC repair.
Limitation: Compatibility with most spring boxes does not confirm that every handle will fit. Compare the cassette dimensions and spindle opening before purchase; the listed measurements are manual and may have slight errors.
Metal Door Handle Spring Cassette Pair
This metal cassette option has an 8mm by 8mm square hole and is listed as 63mm long, 26mm wide, and 5.1mm deep. Its title describes a two-piece pair, while the feature text says the packaging includes four spring boxes, so verify the included quantity in the current listing before ordering.
Best for: Buyers replacing a cassette-style handle spring who need a square 8mm opening and dimensions close to the listed size. Compare it with the River cassette: this one is slightly longer and wider according to the provided measurements.
Limitation: The listing specifically says it does not fit 70PZ/70mm. Avoid it if your handle uses that configuration, and check the quantity discrepancy before purchase.
FMTB-MSA Five-Pack Replacement Springs
These black replacement springs are intended to repair broken or limp door handles. The listing says they suit both right- and left-hand handles and describes them as a practical option for restoring handle function.
Best for: Buyers repairing an internal spring rather than replacing a complete spring cassette. The stated right- and left-hand suitability makes this a more flexible choice when the existing handle’s handing is a concern.
Limitation: The supplied features do not give spring dimensions or a specific uPVC handle compatibility claim. Compare the removed spring’s shape and size before choosing this pack.
FMTB-MSWJ Round Torsion Spring Set
This five-piece set contains round door-handle torsion return springs. The listing specifies a 19mm inner diameter and 29mm outer diameter. It describes the springs as carbon steel and notes that the set includes five types with different numbers of support coils.
Best for: Buyers who have identified a round torsion spring and can match the 19mm inner and 29mm outer diameters. The different support-coil designs may help when the original spring’s coil arrangement is also checked.
Limitation: The dimensions and coil design need to match the handle’s internal mechanism. The listing does not establish compatibility with all uPVC handles or cassette assemblies.
Marsrut Eight-Size Handle Spring Set
This set offers eight spring sizes, listed as 0.74, 0.78, 0.86, 0.89, 1, 1.05, 1.07, and 1.33 inches. The instructions recommend removing the handle and its gasket, taking out the spring, and measuring the spring’s outside diameter before selecting a match from the size chart.
Best for: Buyers who want several size options for an internal handle repair and are prepared to measure the original spring carefully.
Limitation: An assortment does not guarantee that one size fits a particular uPVC handle. Use the provided size chart and compare the spring type, not just its general appearance.
Buying Guide
Do you need a cassette or a loose spring?
A spring cassette is a boxed mechanism that fits inside some door handles. A loose torsion or coil spring is a smaller internal component used in other handle designs. Identify which part is installed before shopping. If the original spring is enclosed in a cassette, a loose spring pack may not be a direct substitute.
Which measurements should you check?
For a cassette, compare its length, width, depth, and spindle-hole shape and size. For an exposed spring, measure its outside diameter and compare its shape and coil arrangement. The River cassette lists an 8mm spindle hole; the other cassette lists an 8mm square hole. Do not assume those descriptions mean the products fit every 8mm handle.
What if the handle is sagging?
A sagging or limp handle can indicate a failed return spring, but the correct repair depends on the handle’s construction. Inspect the mechanism after removing the handle, if you can do so safely. Match the replacement to the part removed rather than selecting by the symptom alone.
How do you avoid a size mismatch?
Record measurements before ordering and compare the existing component with the product’s stated dimensions. Check exclusions, including the metal cassette listing’s 70PZ/70mm warning. If measurements are uncertain, use the seller’s size chart or consult a door-hardware professional.
Frequently Asked Questions
Are all uPVC door handle springs interchangeable?
No. Handles may use different cassette sizes, spindle openings, or internal spring designs. Match the replacement to the original component.
Can I replace a spring cassette with a loose spring?
Not necessarily. A loose spring is suitable only if the handle uses that type of internal spring and the replacement matches its dimensions and design.
How do I measure a door handle spring?
Remove the handle and spring, then measure the part as directed by its design. For the Marsrut set, the listing specifically calls for measuring the spring’s outside diameter.
Does an 8mm spindle hole ensure a fit?
No. The cassette’s overall dimensions, hole shape, handle design, and other fit details also matter.
Is the metal cassette suitable for 70PZ/70mm handles?
No. Its listing states that it is not suitable for 70PZ/70mm configurations.