The best reproduction hardware drawer pulls match your furniture’s style and existing hole spacing. JETLAND’s ornate 3-inch-center pulls suit traditional dressers, while Restore Hardware’s Hepplewhite pull is a compact choice for classic furniture. The UNIQANTIQ bail pull offers polished brass styling, Zorfeter provides a six-piece set of ring pulls, and its hammered six-pack suits drawers needing a coordinated set. Measure the distance between screw holes before choosing any pull.
| Product | Best For | Key Measurement |
|---|---|---|
| JETLAND Antique Cabinet Pulls | Traditional drawers in a set | 3-inch centers |
| Restore Hardware Hepplewhite Pull | Small classic drawers | 2-inch centers |
| UNIQANTIQ Early American Bail Pull | Brass furniture restoration | 2-1/2-inch centers |
| Zorfeter Antique Brass Ring Pulls | Decorative ring-pull updates | Ring diameter: 1.18 inches |
| UNIQANTIQ Hammered Pulls | Matching multi-drawer projects | 3-1/4-inch centers |
JETLAND Traditional Antique Cabinet Pulls
These cast pulls have traditional curves and ornate decorative patterns, making them a strong match for vintage-inspired dressers, nightstands, and cabinets. Their antique brass finish supports a warm, aged look without requiring a separate decorative backplate.
- Size: 3-inch (76 mm) hole centers and 4-9/16-inch overall length.
- Package: Six pulls.
- Best for: Buyers updating several drawers with coordinated traditional hardware.
Choose this set if your furniture already has 3-inch hole spacing and you want a decorative, curved handle. The main limitation is that the listed 3-inch center measurement must match the existing holes; check it before ordering to avoid needing to drill new ones.
Restore Hardware Hepplewhite Drawer Pull
This small Hepplewhite-style pull is designed as a reproduction of classic furniture hardware. Its solid-brass construction and antique brass finish make it appropriate for restoration projects where material and traditional appearance are priorities.
- Size: 2-inch center-to-center spacing.
- Material: Solid brass, as stated in the product features.
- Best for: Smaller classic drawers with 2-inch hole spacing.
Choose this pull when you need a compact, period-inspired option and the drawer’s holes are 2 inches apart. The listing identifies it as a small pull, so it may be less suitable when you want a larger handle or need to cover a broad area on the drawer front.
UNIQANTIQ Early American Bail Pull
This reproduction bail pull pairs a traditional hanging handle with a backplate. It is made of polished solid brass and includes one bail, one backplate, two eyelets, and mounting hardware. The included components create a coordinated look for antique-style cabinets, dressers, or desks.
- Hole spacing: 2-1/2-inch centers.
- Backplate size: 2 inches high by 3 inches wide.
- Best for: Furniture that suits a brass bail pull and visible backplate.
Choose this design if a swinging bail and polished brass appearance fit the furniture. Its 2-1/2-inch centers are a key constraint: measure existing holes, and note that this listing contains one pull rather than a multi-piece set.
Zorfeter Antique Brass Ring Pulls
Zorfeter’s ring pulls feature two flower-shaped discs in different diameters, giving the hardware a decorative vintage appearance. The product description identifies the pulls as pure brass and includes six pulls with six mounting screws.
- Dimensions: 1.69 inches high, 1.22 inches wide, with a 1.18-inch ring diameter.
- Best for: Buyers who prefer a small decorative ring rather than a straight bar handle.
- Set size: Six pulls.
Choose this set for drawers where an ornamental ring-pull profile suits the furniture and a six-piece quantity is useful. Unlike the measured center-to-center pulls above, the listed dimensions do not specify a screw-hole spacing; confirm the mounting arrangement before replacing hardware with different holes.
UNIQANTIQ Hammered Antique Brass Pulls
These hammered pulls offer a textured surface and antique brass finish for furniture that calls for a simpler handle with visible surface detail. Each pull is made of steel, and the package includes six pulls with mounting screws.
- Hole spacing: 3-1/4-inch centers.
- Overall dimensions: 5 inches wide by 1 inch high.
- Best for: Multi-drawer projects needing a matching set and a wider pull.
Choose this option if the 3-1/4-inch spacing fits your drawers and a hammered finish complements the furniture. Avoid assuming it will replace a 3-inch-center pull without modification; the listed centers are different, so measure first.
Buying Guide: How To Choose Reproduction Drawer Pulls
How do you measure drawer pull hole spacing?
Measure from the center of one screw hole to the center of the other. This is the center-to-center measurement, often called the pull’s “centers.” Compare it with the product’s listed spacing, such as 2 inches, 2-1/2 inches, or 3-1/4 inches. Overall handle width is a separate measurement and does not tell you whether the screw holes will align.
Which pull style suits your furniture?
Use the furniture’s shape and existing hardware as a guide. Bar-style pulls work for a straightforward handle, while bail pulls add a hanging grip and backplate. Ring pulls make a compact decorative feature. Ornate curves and flower-shaped details lean toward a more embellished look; a hammered finish adds texture without the same scrollwork effect.
Does material or finish matter?
Check both the stated material and finish rather than relying on color alone. The products here include solid brass, pure brass, steel, and cast construction, with antique or polished brass finishes. A finish describes appearance; material describes what the pull is made from. Match new pieces across a project when a consistent look matters.
How many pulls should you order?
Count the drawers and doors that need hardware, then check the package quantity. The JETLAND and Zorfeter options each list six pulls, as does the UNIQANTIQ hammered set. The Early American bail pull is a one-piece package. The Hepplewhite listing does not specify a multi-piece quantity in the provided product details, so verify the listing before planning a larger project.
Frequently Asked Questions
What does “center-to-center” mean on a drawer pull?
It is the distance between the centers of the pull’s mounting holes. Match this measurement to the existing holes when you want to reuse them.
Can reproduction pulls be used on modern furniture?
Yes, if the style suits the furniture and the pull’s mounting measurements work with the drawer. Check hole spacing and included mounting hardware before purchase.
Are antique brass and polished brass the same finish?
No. These product listings describe antique brass as an aged-looking finish and polished brass as a polished appearance. Compare the finish wording with the look you want.
What should I check before replacing a single drawer pull?
Measure hole spacing, compare the pull’s overall size with the drawer front, and check whether the package includes screws or other mounting components.