The best brass cabinet edge pulls depend on your cabinet’s hole spacing, preferred finish, and material needs. The Emtek satin brass pull is a strong choice for shoppers seeking a brass construction; the khtumeware option suits buyers who want a brushed-brass look and stated metal construction. Goldenwarm and Peaha offer gold- or bronze-tone alternatives, with listed dimensions that help narrow down fit.
| Product | Best For | Listed Size Detail |
|---|---|---|
| Emtek Satin Brass Edge Pull | Brass material and finish options | 6-inch center-to-center |
| khtumeware Brushed Brass Pull | Metal construction and included hardware | 128 mm hole centers |
| Goldenwarm Matte Gold Pulls | Coordinated 10-pull set | 128 mm hole distance |
| Peaha Champagne Bronze Pulls | Shorter 3-inch spacing | 3-inch size in product name |
| Goldenwarm Gold Finger Pulls | Buyers comparing a second 5-inch option | 128 mm hole centers |
Emtek Satin Brass Edge Pull
Best for: Buyers prioritizing a stated brass material and a satin brass finish. The product information describes a high-quality brass handle and says the design is available in seven sizes and six finishes, making it a flexible option for coordinating with different cabinetry.
The listed version has 6-inch center-to-center spacing. Installation screws are included, which can be helpful for a DIY hardware update. Check the selected size and finish before ordering because the listing describes multiple options.
Limitation: This specific version is listed at 6-inch spacing, so it may not match existing holes that use a different measurement.
khtumeware Brushed Brass Finger Pulls
Best for: Buyers looking for a brushed-brass appearance, 128 mm hole centers, and stated metal construction. The listing describes the pulls as durable, high-strength, and corrosion-resistant, and says installation hardware is included.
Listed dimensions are 128 mm between hole centers, 152 mm overall length, 40 mm wide, and 18 mm projection. These measurements can help determine whether the pull suits a cabinet edge and whether it will cover existing holes.
Limitation: The listing describes the product as durable metal but does not specify that it is solid brass. Choose it for the stated finish and dimensions rather than assuming a particular base metal.
Goldenwarm Matte Gold 5-Inch Pulls
Best for: Buyers outfitting several cabinets with a matching 10-pack of gold-tone edge pulls. The product is made from aluminum alloy and uses an electroplated finish, according to the listing. It is a practical brass-color alternative for shoppers who do not require brass as the base material.
The stated hole distance is 5 inches (128 mm), with an overall length of 6 inches and width of 1.7 inches. Installation uses a screwdriver, and the product information recommends pre-drilling to help maintain the cabinet surface.
Limitation: These are aluminum alloy pulls, not stated solid-brass hardware. Confirm the finish tone against other fixtures if a precise color match matters.
Peaha Champagne Bronze 3-Inch Pulls
Best for: Buyers seeking a shorter-spacing option in a concealed, modern design. The product name specifies 3-inch champagne bronze finger pulls, making this set worth considering when the cabinet layout calls for that spacing rather than the more common 5-inch options in this list.
Peaha says the pulls are made from thickened aluminum using a one-piece casting process. The listing also states that each pull includes two screws and can be installed with a standard Phillips-head screwdriver. It describes the design as suitable for cabinets, drawers, and furniture in several rooms.
Limitation: The provided product details do not give full overall dimensions. Verify exact hole spacing and handle measurements before buying, especially when replacing existing hardware.
Goldenwarm 5-Inch Gold Finger Pulls
Best for: Buyers comparing another Goldenwarm 10-pack with detailed dimensions. The listing gives 128 mm (5-1/16 inches) between hole centers, 150 mm overall length, 20 mm height, and 40 mm width. Those figures make it easier to compare with existing cabinet holes and available edge space.
This option is a gold-tone finger edge pull intended for drawers and cabinets. Choose it if its measurements suit your installation and the finish works with your room’s hardware. Compare the listed spacing carefully with the actual distance between your cabinet’s screw holes.
Limitation: The provided features do not specify the pull’s base material or installation hardware. Confirm those details in the product listing if they affect your selection.
Buying Guide: How To Choose Brass Cabinet Edge Pulls
Will the pull fit existing holes?
Measure from the center of one screw hole to the center of the other. This is the center-to-center measurement, also called hole spacing. Match it to the product’s listed spacing before ordering. The options here include 128 mm pulls and a 6-inch Emtek version, which are not interchangeable measurements.
Do you need solid brass or a brass-colored finish?
Check the stated material as well as the finish name. Emtek’s listing specifies brass, while Goldenwarm lists aluminum alloy and Peaha lists aluminum. The khtumeware listing describes durable metal but does not identify a specific alloy. A finish called gold, champagne bronze, or brushed brass does not by itself confirm brass construction.
How much projection and edge coverage do you need?
Compare overall length, width, and projection with your cabinet profile and available finger clearance. A longer pull may cover more of the cabinet edge, but it still needs to align with the holes and fit the door or drawer. Review the product’s dimensions rather than relying on a size label alone.
What should you check before installation?
Confirm the number of pulls in the set, included screws, and whether the listed dimensions match your project. For new holes, mark positions carefully and pre-drill when appropriate; Goldenwarm specifically recommends pre-drilling to help preserve the cabinet surface. Follow the product’s installation instructions and use a screwdriver where specified.
Frequently Asked Questions
Are brass cabinet edge pulls made from solid brass?
Not always. Some pulls have a brass-like finish but use another material, such as aluminum alloy. Check each product’s material description to distinguish base metal from finish color.
How do I measure cabinet edge pull hole spacing?
Measure between the centers of the two mounting holes. Compare that center-to-center distance with the product specifications, not with the pull’s overall length.
Can I replace standard knobs with edge pulls?
Possibly, but the existing holes may not align with the edge pull’s mounting points. Check the hole layout and the pull’s dimensions before choosing a replacement.
Are 5-inch and 128 mm hole spacing the same?
They are close measurements but not exactly identical: 5 inches is 127 mm, while 128 mm is slightly longer. Check the product’s stated measurement and your cabinet holes before purchasing.
What finish works with brass kitchen fixtures?
Brass, satin brass, brushed brass, gold, and champagne bronze finishes can coordinate, but their tones may differ. Compare finish descriptions and images with the fixtures already in the room.