The best 3/4-10 eye bolt depends on thread length, material, and how many you need. The FY 2-inch four-pack suits buyers seeking multiple forged steel lifting points, while QWORK’s 4-inch stainless steel pack offers a longer bolt and corrosion-resistant material. For a shorter 1-1/2-inch option, compare FY’s two- and four-piece packs. These products have different materials and lengths, so verify fit and the required working load before choosing.
| Product | Best For | Key Difference |
|---|---|---|
| FY 3/4″-10 x 2″, four-pack | Multiple lifting points | Forged, heat-treated steel; four pieces |
| QWORK 3/4″-10 x 4″, five-pack | Longer reach and stainless steel | 304 stainless steel; 4-inch total length |
| FY 3/4″-10 x 1-1/2″, two-pack | Two shorter lifting points | Forged, heat-treated steel |
| Easily 3/4″-10 x 1-1/2″, single | Towing or pulling point applications | Carbon steel; stated towing and pulling use |
| FY 3/4″-10 x 1-1/2″, four-pack | Several shorter lifting points | Four pieces; forged, heat-treated steel |
FY 3/4″-10 x 2-Inch Four-Pack
Best for: Buyers who need four 2-inch shoulder eye bolts for a project with multiple mounting points. The listed features describe industrial-grade forged bolts that are quenched and tempered, and state manufacture to ASME B18.15 and B30.26.
The 2-inch length distinguishes this set from the shorter 1-1/2-inch FY options. Choose it if that length suits the installation and you want several matching pieces. The listing does not provide a working-load limit in the supplied product details, so confirm the capacity and application requirements before using it for lifting.
QWORK Stainless Steel 4-Inch Five-Pack
Best for: Buyers seeking a longer eye bolt in 304 stainless steel. QWORK lists a 3/4″-10 UNC thread, 4-inch total length, and 1.25-inch inner eye diameter. Its shoulder design is described as providing stable load support on flat surfaces.
This five-piece set is a better fit when the listed longer length and stainless steel construction match the job. The supplied details do not state a working-load limit or establish suitability for a particular lifting setup. Do not infer lifting capacity from material or dimensions alone; check the product’s full specifications and follow the application’s rigging requirements.
FY 1-1/2-Inch Two-Pack
Best for: Buyers who need two shorter forged steel eye bolts. FY describes these as industrial-grade, 3/4″-10 x 1-1/2-inch lifting shoulder eye bolts, forged and quenched and tempered. The listing also states they are manufactured to ASME B18.15 and B30.26.
Choose this set over a larger pack if two pieces are sufficient and the shorter length fits the installation. Product details supplied here do not specify a working-load limit, so confirm the allowable load and installation conditions before lifting. A shoulder eye bolt also needs to be installed in a way that matches the intended loading direction.
Easily 1-1/2-Inch Towing Eye Bolt
Best for: Buyers looking for a single eye bolt described for towing or pulling applications, including use as a tie-down point during towing or on a tractor bucket. The listing says it is forged from carbon steel and hardened and tempered.
This option differs from the FY listings because its description specifically mentions towing and pulling uses. Choose it if those stated uses match your project and you need one piece. The provided details do not include a load rating; verify the appropriate capacity for the vehicle, equipment, and direction of pull before use.
FY 1-1/2-Inch Four-Pack
Best for: Buyers who need four shorter eye bolts of the same listed size. Like the FY two-pack, this set is described as industrial grade, forged, quenched, and tempered, with manufacture to ASME B18.15 and B30.26.
It is a practical comparison with the two-piece set when a project needs more matching hardware. Choose this pack if 1-1/2 inches is the required length and four pieces suit the job. The supplied product information does not state a working-load limit, so check the complete specifications rather than assuming a safe load from the construction description.
Buying Guide: How To Choose A 3/4-10 Eye Bolt
What does 3/4-10 mean?
The 3/4-10 designation identifies a nominal 3/4-inch thread diameter and 10 threads per inch. The QWORK listing specifically identifies its thread as 3/4″-10 UNC. Confirm the thread standard and dimensions against the receiving hole, nut, or equipment before ordering. Matching the diameter alone is not enough if the thread pitch differs.
Which length should you choose?
Compare the listed length with the available mounting depth and required clearance. The options here include 1-1/2-inch, 2-inch, and 4-inch products, but the QWORK listing calls its measurement a total length. Check how each seller measures length and whether it refers to the threaded shank or the entire bolt. Do not select a longer bolt unless the installation can accommodate it.
Should you choose stainless steel or forged steel?
QWORK lists 304 stainless steel, while the FY listings describe forged, quenched, and tempered construction. The Easily listing identifies forged carbon steel that is hardened and tempered. These descriptions help distinguish materials and construction, but they do not by themselves establish a product’s load capacity or suitability for a specific environment. Use the manufacturer’s complete specifications for the application.
How many eye bolts do you need?
Compare the one-piece, two-piece, four-piece, and five-piece options with the number of mounting points in your project. A larger pack can supply matching pieces, but quantity does not determine safe lifting practice. For lifting or rigging, confirm the rated capacity, installation method, load direction, and any applicable job requirements before use.
Frequently Asked Questions
Are all 3/4-10 eye bolts the same length?
No. The products listed here include 1-1/2-inch, 2-inch, and 4-inch options. Check the individual listing’s measurement description before choosing.
Can a 3/4-10 eye bolt be used for overhead lifting?
Only if the specific product is rated and installed for that application. The supplied details do not provide working-load limits, so verify the manufacturer’s specifications before lifting.
What is the difference between a shoulder eye bolt and a plain eye bolt?
A shoulder design includes a shoulder beneath the eye and is intended to seat against a flat mounting surface. Follow the product’s installation guidance and load-direction requirements.
Does stainless steel automatically mean a higher load rating?
No. Material type alone does not establish a working-load limit. Check the specific product’s rating and application instructions.
Which option is specifically described for towing?
The Easily 3/4″-10 x 1-1/2-inch product listing describes use as a towing or pulling point. Verify its load capacity and suitability for the intended setup before use.