The best 26mm cup cabinet hinges depend on the cabinet’s overlay style, door thickness, and existing hole dimensions. For thin inset doors, consider Luokim’s inset pair; for a larger replacement project, its 10-pack offers more hinges in one set. The selections below also include half-overlay and full-overlay options from other brands. Before buying, check the cup diameter and depth, door thickness, opening angle, and hinge layout against your cabinet.
| Product | Best For | Notable Fit Details |
|---|---|---|
| Luokim Inset 2-Pack | Inset doors | 26mm cup; 14–16mm doors |
| Luokim Full Overlay 10-Pack | Multiple full-overlay doors | 26mm cup; 14–16mm doors |
| Luokim Half Overlay 2-Pack | Half-overlay doors | 26mm cup; 14–16mm doors |
| LIKERAINY Full Overlay 4-Pack | A broader door-thickness range | 26mm cup; 12–18mm doors |
| CVIUYO Half Overlay 2-Pack | Adjustable half-overlay fit | 26mm cup; 12–14mm doors |
Luokim Inset Soft-Close 2-Pack
Best for: Frameless cabinets with inset doors that sit inside the cabinet opening. This pair is specified for 14–16mm-thick doors and has a 26mm cup, 10.5mm cup depth, and 95-degree opening angle.
The nickel-plated hinges include a soft-close system and are described as rust resistant. Choose this option when the door is inset rather than covering the cabinet side. Its main limitation is the narrow stated door-thickness range; confirm both thickness and existing cup depth before installation.
Luokim Full-Overlay Soft-Close 10-Pack
Best for: Replacing hinges across several frameless cabinets with full-overlay doors. The 10-pack provides multiple hinges for a broader project, and the listed specifications include a 26mm cup, 10.5mm depth, 95-degree opening, and 14–16mm door thickness.
The concealed hinges have a nickel-plated finish and soft-close operation. Choose this set if the doors cover the cabinet sides and you need more than a pair. Avoid it for inset or half-overlay layouts, and verify that the 14–16mm door range matches your doors.
Luokim Half-Overlay Soft-Close 2-Pack
Best for: Frameless cabinets with half-overlay doors, where neighboring doors share a cabinet partition. The hinges are listed for 14–16mm doors, with a 26mm cup, 10.5mm cup depth, and 95-degree opening angle.
The nickel-plated finish and soft-close system are useful features for a quiet-closing setup. This is a focused two-hinge option for a small replacement or repair. Its limitation is that the product is intended for half-overlay mounting, so it is not the right choice for inset or full-overlay doors.
LIKERAINY Full-Overlay 4-Pack
Best for: Full-overlay doors when you need a wider stated door-thickness range than some 26mm options provide. LIKERAINY lists compatibility with 12–18mm doors, a 26mm cup diameter, 10mm cup depth, and a 95-degree opening angle.
The hinges have a damper for soft closing, a clip-on assembly, and a sturdy metal construction. The mounting-plate hole spacing is listed as about 32mm. Check that spacing and the 10mm cup depth against your cabinet before ordering; those dimensions differ from some alternatives here.
CVIUYO Half-Overlay Adjustable 2-Pack
Best for: Half-overlay frameless doors measuring 12–14mm thick when fine alignment adjustments matter. The product lists a 26mm cup, 11.5mm cup depth, 90-degree opening angle, and rear adjustment screws for coverage and distance.
Its hydraulic soft-close action begins when the door is approximately 45 degrees from closing. Screws are included, and the hinge is fixed rather than removable. Confirm the cabinet hole diameter carefully and compare the 11.5mm depth with the existing bore; the listed fit differs from hinges specified for 14–16mm doors.
Buying Guide: How To Choose 26mm Cup Cabinet Hinges
Does the overlay style match your cabinet?
Identify whether the door is inset, half overlay, or full overlay before choosing a hinge. Inset doors sit within the cabinet opening. Overlay doors cover some or all of the cabinet side, with the amount determined by the cabinet design. A hinge made for one layout may not position a differently mounted door correctly.
What dimensions should you measure?
- Cup diameter: Confirm the existing bore measures 26mm. A hinge’s cup must fit the drilled hole.
- Cup depth: Compare the listed depth with the hole depth so the cup can seat properly.
- Door thickness: Match the door to the product’s stated range. The options here range from 12–14mm to 12–18mm.
- Mounting layout: Check hole spacing, edge distance, and available clearance when those measurements are provided.
- Opening angle: Compare the listed angle with your space and how far the cabinet door needs to swing.
Should you choose soft-close hinges?
All five selections list soft-close or damping features. This mechanism slows the door near closing to reduce slamming noise. Product details vary: some specify a 95-degree opening, while the CVIUYO half-overlay model lists 90 degrees. Do not assume that all soft-close hinges have identical motion or dimensions.
How many hinges should you buy?
Choose the pack size based on the number of hinges you need to replace, not only the number of doors. The listed options include two-, four-, and 10-packs. Check your existing cabinet setup to determine the required hinge count for each door.
Frequently Asked Questions
What does 26mm cup mean?
It refers to the diameter of the round mounting cup that fits into a hole in the cabinet door. Measure the existing hole before buying.
Will a 26mm hinge fit a 35mm cup hole?
Not as a direct size match. These products are specified for 26mm cups, so compare the hinge diameter with the door’s existing bore.
Are all 26mm cabinet hinges soft close?
No. Cup diameter describes a hinge dimension, not its closing mechanism. Check the product details for a soft-close or damping feature.
Can I use a full-overlay hinge on an inset door?
These hinge types are intended for different door positions. Match the hinge style to the cabinet’s overlay layout.
What should I check before replacing a hinge?
Measure cup diameter and depth, door thickness, mounting-hole spacing, and overlay style. Also compare the opening angle with your current hinge.