A 2-inch P-trap with a cleanout lets you access the trap to help remove clogs while maintaining the curved water seal used in drain systems. Among these options, the Lesso ABS and Canplas PVC models are direct 2-inch candidates; the Charlotte Pipe option is also 2-inch but is a solvent-weld DWV fitting. The first two products are 1-1/2-inch kits, so consider them only if that smaller size suits your plumbing. Confirm pipe type, connection method, and local requirements before choosing.
| Product | Listed size | Connection or material detail | Best suited for |
|---|---|---|---|
| Lesso ABS P-Trap | 2 inch | ABS HUB connections; cleanout plug | ABS-compatible drain systems |
| Canplas PVC DWV P-Trap | 2 inch | PVC; reusable gasket | DWV drainage with a gasketed joint |
| Charlotte Pipe P-Trap | 2 inch | Solvent-weld DWV | Fixed DWV installations |
| ZM Brass P Trap | 1-1/2 inch | Brass kit with reducing washer | Smaller sink connections |
| Bayonet P-Trap Kit | 1-1/2 inch | Polypropylene kit with adapter | Smaller tubular connections |
Lesso 2-Inch ABS P-Trap With Cleanout
Best for: A 2-inch ABS drain setup that needs a built-in cleanout. This black ABS trap has two HUB connections for drain pipes and a cleanout opening with a plug. Its design gives access for clearing clogs without relying solely on disassembly of the trap.
The listing describes the ABS as resistant to corrosion, temperature fluctuations, and chemical damage. It also specifies that the HUB connections should be used with compatible PVC or ABS pipe and primer/cement. Choose this model when its material and connection style match the existing system.
Limitation: The HUB joints require a cemented connection, so this is not a slip-joint kit intended for hand-tightened tubular connections. Confirm pipe material and fitting dimensions before installation.
Canplas 2-Inch PVC DWV P-Trap
Best for: Buyers seeking a 2-inch PVC trap for the drainage portion of a DWV system. Canplas lists a cleanout and a reusable watertight gasket, which may suit installations where a gasketed joint is appropriate. The fitting is injection molded from white PVC.
The stated service temperature is 140°F (60°C), and the product is described as normally used in DWV drainage only. Compare those limits with the intended application and the connection style of the existing piping. Its size and cleanout make it a relevant option for this search.
Limitation: The product information does not identify it as a pressure-use fitting. Do not choose it for a pressurized system; verify how its gasketed connection fits the planned installation.
Charlotte Pipe 2-Inch Solvent-Weld P-Trap
Best for: A fixed 2-inch DWV installation designed for solvent-weld joints. The listing identifies this as a 2-inch P-trap with a cleanout for drain, waste, and vent applications. Charlotte Pipe describes its white fittings as suitable for sanitary DWV, sewer, and storm drainage systems.
This option is a better fit when the planned piping uses compatible solvent-weld connections and the application stays within the stated temperature limit. It is not intended for pressure use, and the listing specifies a maximum system temperature of 140°F.
Limitation: Solvent-weld installation is not interchangeable with slip-joint or gasketed connections. Check the fitting ends and piping material before buying.
ZM Brass 1-1/2-Inch P-Trap Kit
Best for: A smaller 1-1/2-inch sink drain where a brass trap kit and reducing washer suit the connection. The listed product name specifies a cleanout, a 1-1/2-inch size, and a reducing washer. Those details make it an alternative for the right-sized installation, not a direct 2-inch selection.
Limitation: Its stated size is 1-1/2 inches. Avoid this option if the project specifically requires a 2-inch trap unless the complete plumbing design calls for an appropriate transition.
Bayonet 1-1/2-Inch Polypropylene P-Trap Kit
Best for: A 1-1/2-inch tubular setup where the kit’s included parts match the job. The listing includes a J-bend, flanged wall arm, bayonet reducing bushing, O-rings, washers, and turn-and-click nuts, plus a PVC Marvel adapter. This makes it a more complete small-size kit than a bare trap fitting.
Limitation: This is listed as 1-1/2 inch, not 2 inch, and its bayonet connection approach differs from the solvent-weld fittings above. Confirm the included adapter and connection dimensions before selecting it.
Buying Guide: How To Choose A 2-Inch P-Trap With Cleanout
Does the trap need to be exactly 2 inches?
Match the trap size to the pipe and drain design. The Lesso, Canplas, and Charlotte Pipe listings specify 2-inch fittings. The ZM and bayonet kits are 1-1/2 inch, so they are not direct matches for a 2-inch requirement. Do not assume a reducing washer or bushing makes a smaller trap suitable without checking the full installation.
Which connection type should I compare?
Identify whether the existing system uses cemented HUB or solvent-weld joints, a gasket, or tubular slip-style components. Lesso specifies HUB connections and primer/cement. Charlotte Pipe is a solvent-weld DWV fitting, while Canplas lists a reusable gasket. The bayonet kit includes nuts, washers, and O-rings. These connection styles are not interchangeable by default.
What material and application limits matter?
Check pipe material, intended DWV use, and stated temperature limits. The Charlotte Pipe and Canplas listings state a 140°F limit and describe drainage applications rather than pressure service. Lesso is ABS. Select a fitting compatible with the connected pipe and follow applicable plumbing requirements.
Why choose a cleanout?
A cleanout provides an access point for servicing the trap. Check that the plug can be reached after installation and that it can be removed without interference from a cabinet or nearby piping. A cleanout does not eliminate the need to confirm joint sealing and correct assembly.
Frequently Asked Questions
What is the best direct 2-inch option in this list?
Lesso, Canplas, and Charlotte Pipe are listed as 2-inch options. Choose among them by matching material, connection type, and intended DWV use to the installation.
Can I use a 1-1/2-inch trap on a 2-inch drain?
Not as a direct size match. Use only a properly designed transition when the plumbing layout allows it, and verify the required fitting dimensions.
Are these traps suitable for pressurized plumbing?
The Charlotte Pipe listing says it is not intended for pressure use, and the Canplas listing describes use in DWV drainage. Check product specifications and local requirements for any other application.
Does a cleanout mean the trap never needs removal?
No. A cleanout offers access for servicing, but some blockages or maintenance tasks may still require disassembly.
Should I choose ABS or PVC?
Choose the material and connection method compatible with the existing drain system. Confirm pipe material and joint requirements before purchasing.