This guide highlights galvanized steel wall ties and related strap ties that are best suited for masonry anchoring, wall bracing, and deck or framing applications. Each product is evaluated for use cases such as brick-to-wood connections, rebar tying, and holdown requirements. The selections favor corrosion resistance, ease of installation, and suitability for specific cavity sizes or strap widths. The top picks target builders, DIY homeowners, and contractors looking for durable, long-lasting ties that mitigate uplift and improve structural stability. A quick summary table follows to help compare options at a glance.
| Product | Best For | Key Feature |
|---|---|---|
| GBGS 32ft Perforated Strap Tie Brace (1-3/8″ Width) | General framing and masonry with pre-drilled holes | 1.0 mm thick galvanized steel with pre-drilled holes |
| GBGS 32ft Perforated Strap (2″ Width) | Higher-load strap ties for wider assemblies | 2″ width; hot-dip galvanized |
| Simpson Strong-Tie CS16 Coiled Strap | Long runs and adjustable lengths on site | 150 ft coil; versatile tension and uplift resistance |
| LEIFIDE Corrugated Brick Wall Tie 0.88″ x 6.56″ | Brick-to-wood frame connections in cavities | 22 gauge, rust-resistant galvanized steel |
| Chenteel 8 Pcs Holdown Shearwall Attachment | Decks and shearwall tension ties | Hot-dip galvanized, pre-drilled for stable mounting |
GBGS 32ft Galvanized Perforated Strap Tie Brace (1-3/8″ Wide)
Material and finish: low carbon steel with hot-dip galvanization for corrosion resistance. Length is 32 ft (10 m); width 1⅜” (35 mm); thickness 20 gauge (1 mm). Pre-drilled holes include Φ3.8 mm for #6 screws and Φ6.2 mm for #12 screws; center hole spacing is 2 inches (50 mm) and 4 inches (100 mm). Best for: general framing where a lighter strap is adequate and pre-drilled holes simplify installation. Caution: ensure screw sizes match hole diameters for secure anchorage.
Why it’s selected
Best for projects needing a long, continuous strap with consistent pre-drilled holes. The 1-3/8″ width suits typical wall ties and light-to-moderate load connections. Cited features support straightforward on-site installation, especially in wood-framed masonry interfaces.
Limitations
1 mm thickness may be less suitable for very high-load applications; verify load requirements and local code expectations before use in structural ties.
GBGS 32ft Perforated Strap Tie Brace (2″ Width)
Material: Carbon steel with a hot-dip galvanized finish. Length 32 ft (10 m); width 2″ (50.8 mm); thickness 20 gauge (1 mm). Prepunched holes: Φ3.8 mm and Φ6.2 mm; screw hole center spacing 2⅜ inches (60 mm). Best for: wider strap applications and higher-braced connections where a larger width improves load distribution. Caution: ensure compatible fasteners and spacing for the chosen structural installation.
Why it’s selected
Selected for projects requiring a wider strap to cover larger joints or where multiple fasteners per side are needed. The dual hole options support various screw sizes, aiding versatility on site.
Limitations
May require larger fasteners and deeper drilling; verify tool and fastener compatibility prior to purchase.
Western Steel & Wire #16 Galvanized Annealed Tie Wire
Material: #16 gauge galvanized annealed wire; length 340 ft. Finish provides corrosion resistance suitable for outdoor use. Best for: rebar tying, fencing, and general binding where flexible wire is advantageous. Caution: not a clip or strap; may not replace anchor ties in high-load structural connections.
Why it’s selected
Chosen for its long continuous run and durable zinc coating, which favors flexibility in different binding tasks while maintaining corrosion resistance.
Limitations
Not a direct wall tie. For serious structural ties, pairing with appropriate anchors or brackets is necessary to meet code requirements.
LEIFIDE Corrugated Brick Wall Tie 0.88″ x 6.56″
Material: 22-gauge steel with galvanization. Dimensions: 0.88″ wide x 6.56″ long. 200 pieces per pack. Best for: brick-to-wood frame connections where steady anchoring across masonry cavities is needed. The galvanized finish enhances rust resistance for long-term outdoor or semi-exposed use. Caution: designed for 1-inch wall cavities; verify cavity size before selecting quantity.
Why it’s selected
Selected for masonry projects requiring secure, corrosion-resistant ties that fit standard 1-inch cavities. The corrugated design adds grip and shear resistance in brick assemblies.
Limitations
Not intended for very deep cavities or unusually wide ties; measure project tolerances to ensure fit.
Chenteel 8 Pcs Holdown Shearwall Attachment
Material: 16-gauge steel with hot-dip galvanization. Includes 8 pieces with 5 mm screw holes and a large slot for lag screws or bolts. Dimensions approximate 9.6″ x 2.6″ x 2.4″. Best for: deck tension ties and shearwall connections that require secure lift resistance and stable load transfer. Caution: screws or bolts are not included, so fastener compatibility must be confirmed for each installation.
Why it’s selected
Chosen for reliable load transfer and corrosion protection in tension applications. The pre-drilled holes and robust build support structural stability in outdoor or semi-exposed locations.
Limitations
Screws not included; ensure compatible fasteners are available and appropriate for the project’s structural requirements.
Buying Guide
What type of wall tie should I choose?
Choose straps for long, continuous connections or for wide joints (2″ width options). For brick-to-wood or masonry-to-frame assemblies, corrugated or perforated ties with pre-drilled holes simplify installation.
Which galvanization matters?
Hot-dip galvanization offers the strongest rust resistance for outdoor use and long-term exposure. Electro-galvanized finishes provide decent corrosion protection at a lower cost but may wear faster in harsh environments.
What cavity size and screw compatibility are important?
Check hole sizes and spacing to ensure compatible fasteners. For brick or masonry ties, confirm drilling requirements and the availability of appropriate anchors or screws for your substrate and load demands.
How do I assess load requirements?
Assess uplift and shear requirements for the project. Use wider straps or higher gauge ties for higher loads, and prefer holdowns or shear ties in areas with significant uplift or lateral forces.
What installation considerations help ensure longevity?
Apply corrosion protection with hot-dip galvanized products and ensure all fasteners are compatible with the tie material and substrate. Verify that pre-drilled holes align with your fasteners and spacing needs for a secure, durable connection.
FAQ
- Are galvanized wall ties suitable for outdoor use? Yes, galvanized finishes resist rust and corrosion, making them suitable for outdoor and masonry applications.
- What is the advantage of a coiled strap like the CS16? Coiled straps provide long, continuous lengths that can be cut to the exact size needed on site, reducing waste and inventory.
- Can these ties be used for brick and wood framing? Yes, many of these ties are designed for brick-to-wood or masonry-to-frame applications, provided proper fasteners are used.
- Do all products include screws or bolts? Some items include holes for screws but do not include the fasteners themselves; check product details and plan accordingly.
- What is the best tie for high uplift forces? Higher-load, wider straps or official holdown systems are better for high uplift scenarios; consider products with pre-drilled holes and robust galvanization.
- How do I select the right size tie? Match the strap width to the joint width and ensure the hole spacing aligns with your chosen fasteners and substrate.