Angle restriction hinge clips limit how far a cabinet door opens, helping reduce collisions with nearby walls, cabinets, and appliances. The best choice depends on hinge compatibility and how many clips you need. Blum’s 86-degree clips are specified for certain Compact hinges, while Rok Hardware’s option is designed for face-frame hinges. Berta and ETZ offer larger packs for broader projects, but buyers should confirm fit before ordering.
| Product | Best For | Pack Size |
|---|---|---|
| Rok Hardware NEH89 | Face-frame hinge setups | 10 |
| Blum Compact Clip | Specified Blum Compact hinges | 10 |
| Blum Nylon Clip | Buyers seeking a basic 86-degree clip | 10 |
| Berta Restriction Clips | Multi-door face-frame projects | 20 |
| ETZ Hinge Restrictors | Larger projects needing a 50-pack | 50 |
Rok Hardware NEH89 Face-Frame Clips
Best for: Buyers with face-frame cabinet hinges who want to limit door travel to 86 degrees. The stated purpose is to help keep doors from swinging into nearby cabinets, walls, appliances, or glass fixtures.
The 10-pack uses a curved clip that slides into the gap between the hinge linkage and crossbar. The listing describes installation as quick and straightforward. This makes it a relevant choice when the cabinet hinge setup matches the face-frame type specified by the seller.
Limitation: The hinge is sold separately, and the listed information does not establish compatibility with every face-frame hinge. Check the hinge design before buying.
Blum 86-Degree Compact Hinge Clips
Best for: Owners of COMPACT BLUMOTION or COMPACT CLIP hinges with integrated soft-close functionality. The product listing names these hinge types specifically, making this a more targeted option than a generic clip listing.
The kit contains 10 plastic clips. Each is approximately 11.9 mm long and 10.5 mm wide. Installation is described as inserting a clip into the base of the hinge arm; the listing says no special tools are required. The clips restrict the cabinet door to an 86-degree opening angle.
Limitation: The stated compatibility is limited to the specified Blum Compact hinge families. Avoid choosing this clip based only on its 86-degree rating if your hinge model is different.
Blum Nylon 86-Degree Restriction Clips
Best for: Buyers who need a 10-piece set of black nylon clips identified for an 86-degree opening angle. The listing specifies nylon material, a black finish, and an order quantity of 10 pieces.
This option is straightforward for shoppers who already know the clip they need and want a small pack. It provides less detail about installation and hinge compatibility than the Blum Compact product above, so verify that the clip matches the hinge before purchasing.
Limitation: The supplied product information does not name compatible hinge models or describe how to install the clips. Do not assume that all Blum hinges use the same restriction clip.
Berta 20-Pack Face-Frame Clips
Best for: Multi-door projects using soft-close face-frame cabinet hinges. The 20-piece pack is intended to reduce the opening angle from 105 degrees to 86 degrees, according to the product details.
The clips are described as restraints that help prevent doors from opening too wide and hitting adjacent cabinets, walls, or appliances. Compared with a 10-piece set, this pack supplies more clips for a larger project or for keeping spare pieces on hand.
Limitation: The listing describes use with face-frame hinges, but does not identify specific hinge models. Confirm the hinge’s construction and clip fit before ordering.
ETZ 50-Pack 86-Degree Restrictors
Best for: Buyers outfitting many cabinet doors who want a 50-piece pack. The listing says the plastic restrictors limit opening to 86 degrees and are intended to help prevent doors from colliding with walls, neighboring cabinets, or appliances.
The product description emphasizes a compact design and plastic construction. Choose this if quantity is a priority and the clip is suitable for your hinges. The hinge is sold separately, so the pack is for restricting compatible hinges rather than replacing them.
Limitation: The product information does not name specific hinge models or give detailed installation steps. Confirm compatibility before selecting it for a full cabinet installation.
Buying Guide: How to Choose an Angle Restriction Hinge Clip
Which opening angle do you need?
All five products in this guide are described as restricting cabinet doors to 86 degrees. That limit can help where a wider swing risks contact with nearby surfaces. Before buying, consider the door’s current opening range and the clearance around it. A restriction clip reduces travel; it does not change the cabinet layout or replace a hinge.
Does the clip fit your hinge?
Compatibility is the most important comparison. The Blum Compact clip listing names COMPACT BLUMOTION and COMPACT CLIP hinges. Rok Hardware and Berta identify face-frame hinge applications. Other listings provide less model-specific information. Compare the product description with your hinge’s type and design rather than relying on the angle alone.
How many clips should you order?
Pack sizes range from 10 to 50 pieces. Count the doors and hinges in your project, then check the product’s installation instructions for how many clips are used per door. Do not assume every door requires the same quantity unless the manufacturer’s directions confirm it. A larger pack may suit multiple cabinets, while a smaller one may better match a limited repair.
What else should you verify?
- Check whether the hinge is included; some listings explicitly say it is sold separately.
- Review material and dimensions when available, especially if replacing an existing clip.
- Confirm installation location and method for the specific hinge.
- Test door movement carefully after installation to ensure the restriction works as intended.
Frequently Asked Questions
What does an angle restriction hinge clip do?
It limits how far a cabinet door opens. These products are listed to restrict opening to 86 degrees.
Will an 86-degree clip fit any cabinet hinge?
No. Fit depends on hinge design. Check the product’s stated hinge compatibility before buying.
Are the hinge and clip sold together?
Not necessarily. The Rok Hardware and ETZ listings state that the hinge is sold separately. Check each product listing for included parts.
Do these clips require special tools?
The Blum Compact listing says its clips insert into the hinge arm without special tools. Installation details are not provided for every product here.
How can I choose between a 10-, 20-, and 50-pack?
Count the hinges or doors in your project and follow the clip maker’s installation directions. Select a pack size that covers the required quantity.