For PPE made in the USA, the right choice depends on the protection level and fit you need. The IFM Indiana Face Mask N95 is best for buyers seeking a NIOSH-approved respirator; IRIS USA and EG ECOGUARD offer ASTM Level 3 mask options; Brightt is a single-use Level 3 option; and ProStar is a lightweight procedure mask with stated 95% filtration efficiency. Compare the listed features below, and check the product details for current specifications before buying.
| Product | Best For | Key Listed Feature |
|---|---|---|
| IFM Indiana Face Mask N95 | Respirator-level particulate protection | NIOSH-approved N95; head straps |
| IRIS USA Surgical Face Mask | Professional or higher-exposure use | ASTM Level 3; fluid resistance |
| EG ECOGUARD Disposable Masks | Families and on-the-go use | Four-ply; individually wrapped |
| Brightt Disposable Face Masks | Everyday single-use wear | ASTM Level 3; ear loops |
| ProStar Procedure Face Masks | Lightweight procedure-mask use | Stated 95% filtration efficiency |
IFM Indiana Face Mask N95
Best for: Buyers looking for an N95 respirator rather than a loose-fitting disposable face mask. The listing identifies these as NIOSH-approved N95 respirators with particulate filtration greater than 95%. It also states that the respirators are made in Indiana and individually packaged.
The design uses elastic head and neck straps to help maintain facial fit and a seal. The box contains 25 single-use respirators. This makes it a useful choice for people who prioritize a respirator style and individually sealed packaging.
Limitation: The listing specifies a universal fit and gives facial-cup dimensions, but one size may not suit every face. A proper fit is important for a respirator.
IRIS USA ASTM Level 3 Surgical Mask
Best for: Buyers who want a USA-made surgical mask with stated ASTM Level 3 performance. The product description reports 160 mmHg fluid resistance and high bacterial and particulate filtration efficiency. Its three-layer construction includes an outer fluid-resistant spun-bond layer, a melt-blown filtration layer, and a soft inner layer.
This 50-pack may suit professional settings or situations where fluid resistance is an important listed feature. Choose it over a general-purpose mask if the stated Level 3 classification and layered design match your requirements.
Limitation: This is a surgical mask, not an N95 respirator. The product information does not describe a respirator-style seal.
EG ECOGUARD Four-Ply Disposable Masks
Best for: Families, students, and buyers who want individually wrapped masks for storage or travel. EG ECOGUARD describes these as four-ply, ASTM Level 3 masks made in its U.S. facilities. The 50-pack includes individually wrapped masks, which can be convenient for backpacks, cars, offices, or distribution among family members.
The product also offers color options, making it a practical choice for people who prefer alternatives to standard blue or white masks. Choose this if individual packaging and four-ply construction are priorities.
Limitation: These are disposable masks, and the listing does not describe them as N95 respirators.
Brightt ASTM Level 3 Disposable Masks
Best for: Buyers who want a basic single-use mask with ear loops and a nose guard. The listing identifies the masks as made in the USA and ASTM Level 3, with a three-ply design. It describes a soft inner layer intended to absorb moisture and a filtering layer for particles.
These masks may suit errands, work, or other everyday settings where disposable ear-loop masks are preferred. The pack contains 50 masks, and the listing says to replace a mask after use rather than reuse it.
Limitation: The manufacturer recommends a new mask every 12 to 24 hours and says the product should not be reused. It does not provide a respirator-style seal.
ProStar Three-Layer Procedure Masks
Best for: Buyers seeking a lightweight procedure mask with a nose wire. ProStar states that the masks are made in the USA using American-made materials and tested in the USA for 95% or greater particulate filtration efficiency. Its three-layer design includes a soft inner lining, adjustable nose wire, and elastic ear loops.
Choose this option if breathability and adjustability are priorities for extended disposable-mask wear. The 50-count pack is suited to keeping a supply available for routine use.
Limitation: The listed 95% filtration efficiency does not make this an N95 respirator; the product is described as a procedure mask.
Buying Guide: How To Choose USA-Made PPE
Do you need a respirator or a disposable mask?
An N95 respirator is a different product type from a surgical or procedure mask. Choose the IFM respirator if you specifically need the listed NIOSH-approved N95 design. For loose-fitting disposable face coverings, compare the ASTM Level 3 options and the ProStar procedure mask instead. Do not treat filtration figures for different product categories as directly interchangeable.
What should you compare on the label?
- Protection classification: Check whether the product is identified as N95, ASTM Level 3, or a procedure mask.
- Fit and fasteners: IFM uses head and neck straps; the other featured products use ear loops or describe them as disposable masks.
- Construction: Compare listed ply count, filtration layer, nose wire, and fluid-resistance information.
- Packaging: Individually wrapped masks can be easier to carry or distribute. EG ECOGUARD and IFM list individual packaging.
- Country-of-origin details: Review the manufacturer’s product information if domestic manufacturing is a priority.
How many masks should you buy?
Consider how often masks will be used and whether you want individually packaged units. The featured products include 25-count and 50-count boxes. Follow the manufacturer’s directions for single use and replacement, and do not reuse a product when its instructions say it is disposable.
Frequently Asked Questions
What is the difference between an N95 and a Level 3 mask?
An N95 is a respirator designed for a close facial fit, while an ASTM Level 3 mask is a surgical-mask category with stated performance criteria. They are different product types and should not be assumed to provide identical protection.
Which featured product is specifically listed as NIOSH-approved?
The IFM Indiana Face Mask is identified in its product name and features as a NIOSH-approved N95 respirator.
Are all five products individually wrapped?
No. Individual wrapping is specifically listed for EG ECOGUARD and IFM. Check each product’s packaging details before ordering.
Which option includes fluid-resistance information?
IRIS USA lists ASTM Level 3 protection and 160 mmHg fluid resistance in its product features.
Can disposable masks be reused?
Follow the product’s instructions. Brightt says its masks are single use and should not be reused; disposable products should be replaced according to their stated directions.