For hand-tightened fastening, the listed brass wing nuts are the closest match: choose the M4 set for smaller metric threads, an M6 set for larger metric threads, or the 1/4-20 wing nuts for an imperial thread. The product details provided include brass wing nuts, but no brass bolts, so match any bolt separately by thread size and pitch. The cold-forged option is not identified as brass, making it a material alternative rather than a brass substitute.
| Product | Best for | Thread or quantity |
|---|---|---|
| uxcell M4 Brass Wing Nuts | Smaller metric fasteners | M4, 12 pieces |
| uxcell M6 Brass Wing Nuts | Small M6 jobs | M6, 4 pieces |
| uxcell M6 Brass Wing Nuts | Projects needing more M6 nuts | M6, 12 pieces |
| Hard-to-Find Fastener Wing Nuts | Imperial-thread applications | 1/4-20, 10 pieces |
uxcell M4 Brass Wing Nuts, 12-Piece
Best for: Projects that need compact M4 hand-tightened hardware in a brass finish. This set contains 12 butterfly wing nuts with an M4 thread, a 0.7 mm pitch, and a listed 10 mm head diameter.
The brass construction is described as corrosion- and rust-resistant, with wear resistance and a fastening function. The manufacturer lists uses such as furniture, folding chairs, craft projects, mechanical assemblies, and electronic equipment. It is selected for combining a defined metric thread specification with a larger quantity than the M6 four-piece pack.
Limitation: These are nuts, not bolts. Confirm that the mating bolt is M4 with a 0.7 mm pitch before ordering.
uxcell M6 Brass Wing Nuts, 4-Piece
Best for: Buyers who need only a few M6 brass wing nuts. The listed thread size is M6, the pitch is 1 mm, and the head diameter is 11.5 mm. Four nuts are included.
Like the other listed uxcell brass options, this product is intended for hand tightening and is described as resistant to corrosion, rust, and wear. Suggested applications include furniture, bed frames, folding chairs, boat accessories, and 3D projects. It is a practical choice when thread size matters more than buying a larger pack.
Limitation: The pack has four pieces, so it may not suit projects that require many fasteners or spares. Check the mating bolt’s M6 thread and 1 mm pitch.
uxcell M6 Brass Wing Nuts, 12-Piece
Best for: Repeated M6 assembly or projects that benefit from extra nuts on hand. This pack contains 12 M6 brass wing nuts with a 1 mm thread pitch and an 11.5 mm head diameter.
Its material and listed use cases match the four-piece M6 option, including furniture, clamps, mechanical assemblies, and craft products. Choose this pack over the smaller one when quantity is the priority; the thread dimensions are otherwise the same according to the supplied details.
Limitation: The listing describes wing nuts only, not matching bolts. Verify the bolt’s thread size and pitch rather than relying on appearance alone.
Hard-to-Find Fastener 1/4-20 Wing Nuts
Best for: Buyers who need an imperial 1/4-20 wing nut rather than a metric brass nut. The product name specifies cold-forged wing nuts and a pack of 10. The listed dimensions include a 1/4-inch diameter, a 1/2-inch second diameter, and a 1-3/32-inch length.
This option is included because its wing-nut format and specified 1/4-20 thread make it relevant when a project uses inch-based fasteners. It is a different thread system from the M4 and M6 products.
Limitation: The provided details do not identify this product as brass or state its material finish. Avoid choosing it when brass construction is essential; confirm the thread fit with the mating bolt.
Buying Guide: How To Choose Brass Wing Nuts And Bolts
Which thread size do you need?
Start with the bolt or threaded stud that the nut must fit. The listed brass choices are metric: M4 at a 0.7 mm pitch and M6 at a 1 mm pitch. The alternative wing nuts specify 1/4-20, an imperial thread. Metric and imperial threads are not interchangeable just because their diameters appear similar. Match both diameter and pitch.
How many nuts should you buy?
For M4, the listed pack contains 12. For M6, choose between four pieces for a smaller repair and 12 for a project with multiple fasteners or spares. The 1/4-20 option lists 10 wing nuts. Consider the number of fastening points and whether replacements would be useful.
Do you need brass bolts too?
The brass products in this selection are wing nuts; the provided product information does not include a matching brass bolt. Select a bolt separately by thread size and pitch, then confirm its length and head style suit the assembly. Do not assume that a bolt will fit based only on its nominal diameter.
When is hand tightening useful?
Wing nuts have projecting wings intended to make turning by hand easier than turning a standard hex nut. They are useful when an assembly needs frequent adjustment or removal. For a joint requiring a specified clamp force or tool-tightened security, check the application requirements instead of assuming a hand-tightened fastener is suitable.
Frequently Asked Questions
Are all the listed wing nuts brass?
No. The three uxcell options are described as brass. The Hard-to-Find Fastener listing specifies cold-forged wing nuts but does not identify the material in the supplied details.
Can an M6 brass wing nut fit a 1/4-20 bolt?
No. M6 and 1/4-20 use different thread systems. Use an M6 nut with a matching M6 bolt, or a 1/4-20 nut with a matching 1/4-20 bolt.
What is the difference between the two M6 uxcell packs?
Both list M6 threads, a 1 mm pitch, and an 11.5 mm head diameter. The four-piece pack is suited to smaller needs; the 12-piece pack supplies more nuts.
Does this selection include brass bolts?
No brass bolts are specified in the supplied product information. The brass products are wing nuts, so buyers need to source and verify compatible bolts separately.